Here's a great Neo-Geo MVS conversion to home
format project that was submitted by Takagisan! He has given us permission
to post his project here for all to enjoy. Here are the details relating
to the Pulstar NGH task!
The sacrificial host cartridge for this project
is Samurai Shodown 3. Transfer the "V"
and "P", "C" M1 and S1 chips to their appropriate locations
on the host boards. The circuit boards are clearly marked so just take
your time and put them in the right chip locations.
You do not need to change any of the jumpers on the CHA PCB board. Excellent!
However, you will need to make a jumper adjustment on the PROGBK1Y PCB.
Ready? Here it is: Remove the jumper block found on JV 8. Place
jumper on JV 12. Ding ding ding!!!! That's all there is to it.
|
Art? Sure thing. Takagisan was kind enough to include these as well.
I'd also like to thank Afugusan for his role in the project as he
provided the necessary materials for the project. Note: I
removed the barcode information from the insert.
|
To all that have contacted me regarding conversion jobs. I do not sell
nor offer any conversion service. For me this is a hobby, nothing
more.
-- Tiptonium Out...
|
