|
Hello Everyone,
This project involves converting a Neo Mr. Do! MVS cartridge to NGH format.
Why this game was never released for the home system is beyond my comprehension.
Why? The game is a real gem.
The sacrifice cartridge that I used for this conversion is a Art
of Fighting 2 home cartridge. This SAC cartridge is easily found for cheap,
especially the Japanese version! Don't worry, I did not harm a collectible
version of Neo Mr. Do! ... No serial number, all identity had been lost.
The chipset was legit! That can be hard to find since the game is one
that was bootlegged quite a bit.
This is a straight forward conversion. Even though the SAC looks nothing
like the origianl MVS boards it'll work out just fine. If you are looking
for a more exact PCB match I've been told that World Heroes 2 is an exact
match. I do not have the jumper setup for that one so you're on your own
if you go that route.
The Details:
Remove the V, P, S, M, and C chips from the Sacrifice NGH boards.
Remove the V, P, S, M and C chips from the Neo Mr. Do! MVS cartridge.
Place them in their corresponding locations on the sacrifice NGH boards.
|
Jumper Settings:
PROGRKB
| Jumper |
Setting |
| 1 |
on |
| 2 |
off |
| 3 |
off |
| 4 |
off |
| 5 |
off |
| 6 |
off |
| 7 |
off |
| 8 |
off |
| 9 |
off |
| 10 |
on |
| 11 |
off |
| 12 |
off |
| 13 |
on |
| 14 |
off |
| 15 |
off |
| 16 |
on |
| 17 |
on |
NOTE: There are NO jumpers to change on the CHA PCB.
|
|
The Insert and Label:
I created a custom insert and label for Neo Mr Do. I used snippets
from the Japanese MVS flyer, several screen grabs, you get the
point. I decided to go with a nice bright festive pink color,
it looks smashing. The insert is designed to fit the old style
case.
Click Here To Download Hi-Res Insert
Click
Here To Download Hi-Res Label
|
Tiptonium Out...
|
