May 2005

Power Spikes 2 Project

Here's a cool project from Dragonfly ! The game is Power Spikes 2!

The sacrificial home cart for this project is Samurai Spirits 2 . Dragonfly used this cart as a SAC since the V1 chip is 32megs. Remove the V, P, S, M, and C chips from the Sacrifice NGH boards.

Remove the V, P, S, M and C chips from the Power Spikes 2 MVS cartridge. Place them in their corresponding locations on the sacrifice NGH boards. Solder them up nice and clean, take your time. Congratulations, you're almost done. ;-)

On the "CHAR" board you'll need to set these jumpers to "on": J5, J6, These must be set to "off": J7. J8

Moving on to the "PROG" board set these jumpers to "on": J10, J14, J15. Also on the "PROG" board you'll need to turn these jumpers "off": J9, J16, J17.

Here's a picture of the final project. Nice.