May 2005

Fight Fever Project

Wow, Dragonfly is at it again! Here are the easy instructions for a cool conversion of the game Fight Fever.

The sacrificial home cart for this project is Samurai Spirits 2 . Dragonfly used this cart as a SAC since the V1 chip is 32megs. Remove the V, P, S, M, and C chips from the Sacrifice NGH boards.

Remove the V, P, S, M and C chips from the Fight Fever MVS cartridge. Place them in their corresponding locations on the sacrifice NGH boards. Solder them up nice and clean, take your time. Congratulations, you're almost done. ;-)

On the "PROG" board set J9 to "off" and j10 to "on". Leave the rest alone!

Here's a picture of the final project.