After some trial and error, Takagisan has created a successful Breakers Revenge conversion. Here's the data you'll want in order to build your own Breakers Revenge home conversion!
The sacrificial host cartridge for this project
is King of Fighters 95. Transfer the "V"
and "P", "C" M1 and S1 chips to their appropriate locations
on the host boards. The circuit boards are clearly marked so just take
your time and put them in the right chip locations.
Ok, now onto the jumper settings for each board. Ready? Good! Here goes...
ProgBK1Y
J1 ON
J9 ON
J13 ON
JB3 ON
JV5 ON
JV6 ON
JV11 ON
JV12 ON
The rest are off... CHA256RY
J2 ON
J3 ON
J9 ON
J10 ON
J11 ON
J12 ON
J13 ON
The rest are off...
Note: Jumper on / off example...
-- Tiptonium Out...
|
